In stock / สินค้าพร้อมส่ง จำนวน : 10 PCS.
Display Type |
TFT Color LCD
|
---|---|
Display Size |
15”
|
Resolution |
1,024 x 768 pixels (XGA)
|
Effective Display Area |
W304.1 x H228.1 mm
(W11.97 x H8.98 in.) |
Display Colors |
16 million colors
For details about Display Colors, refer to the manual for your screen editing software. |
Backlight |
White LED
(Not user replaceable. When replacement is required, contact your local distributor.) |
Brightness Control |
0...100 (Adjusted with touch panel or software)
|
Backlight Service Life |
50,000 hours or more (continuos operation at 25 °C [77 °F]
before backlight brightness decreases to 50% |
Application Memory |
Screen Size: 64MB *SD card
|
Touch Panel Type |
Resistive Film (analog, multi-touch)
|
Touch Panel Resolution |
1,024 x 1,024
|
Touch Panel Service Life |
1 million times or more
|
USB (TYPE-A) |
Front USB 2.0 (Type A) x 1*1
|
USB (mini-B) |
USB 2.0 (mini-B) x 1*2
|
1When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one bar code reader. If you connect multiple devices that are the same type, only the first device will work.
2When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one bar code reader. If you connect multiple devices that are the same type, only the first device will work.
International Safety Standards |
|
---|---|
Rated Input Voltage |
12...24 Vdc
|
Input Voltage Limits |
10.8...28.8 Vdc
|
Allowable Voltage Drop |
12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less |
Power Consumption |
57W or less (display module with box module)*1
22W or less (display module only) |
In-Rush Current |
30 A or less
|
Voltage Endurance |
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
|
Insulation Resistance |
500 Vdc, 10 MΩ or more (between charging and FG terminals)
|
Surrounding Air Temperature |
0...60 °C (32...140 °F)
|
Storage Temperature |
-20...60 °C (-4...140 °F)
|
Storage Humidity |
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less) |
Dust |
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
|
Pollution Degree |
For use in Pollution Degree 2 environment
|
Atmosphere |
800...1,114 hPa (2,000 m [6,561 ft] or lower)
|
Vibration Resistance |
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.) 9...150 Hz Fixed acceleration: 9.8 m/s2 X, Y, Z directions for 10 cycles (approx. 100 min.) |
Noise Immunity |
Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs Rise Time: 1 ns (via noise simulator) |
Electrostatic Discharge Immunity |
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
|
Structure |
When using a factory-installed front USB cover: IP65F,IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13 * The front face of this product when properly installed in an enclosure and not using the front panel USB port. NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model Number PFXZCDCVUS1).*3 |
Weight Approx. |
4.5kg (9.9 lb) or less
|
External Dimensions |
W397 x H296 x D67 mm(W15.6 x H11.7 x D2.64 in.)
|
Panel Cut Dimensions |
W383.5 x H282.5 mm(W15.1 x H11.12 in.)*2
Panel thickness area:1.6...5 mm (0.06...0.2 in.)*4 |
3For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
4Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.*3 The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules.