Home > Brand > PHOENIXCONTACT > Tools
1212771
1212771
Crimping pliers, laser marked according to customer specifications, for ferrules according to DIN 46228 Parts 1+4, 0.25 mm? ... 6 mm?, front insertion, trapezoidal crimp - 1212771
1212735
1212735
Die, for unshielded RJ11 plugs - 1212735
1213156
1213156
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm? ... 10 mm?, also for TWIN ferrules up to 2 x 4 mm?, automatic cross section adjustment, lateral insertion, equipped with fall protection - 1213156
1212746
1212746
Die, for CRIMPFOX-M, for coaxial connectors - 1212746
1212845
1212845
Crimping pliers, for TWIN ferrules according to UL 486F, three marked die stations, unlockable pressure lock, lateral entry - 1212845
1212739
1212739
10-pos. replacement die - 1212739
1212096
1212096
Crimping pliers, for coaxial connectors, 8.23 mm, 9.14 mm, 1.73 mm, HEX crimp - 1212096
1212078
1212078
Die, for Crimpfox-M, for non-insulated cable lugs 0.75 - 2.5 mm?, packed in a serial storage box - 1212078
1212111
1212111
Crimping pliers for D-SUB contacts, high-density, 0.08 ? 0.5 mm?, B-crimp, including contact locator - 1212111
1212081
1212081
Die, for Crimpfox-M, for ferrules 16 - 25 mm?, packed in a serial storage box - 1212081
1212519
1212519
Replacement charger, for 100 V ... 240 V AC mains voltage, short charging time, short-circuit-proof, protected against polarity reversal, operating state indicator - 1212519
1212085
1212085
Die, for Crimpfox-M, for non-insulated slip-on sleeves 0.5 - 6 mm?, packed in a serial storage box - 1212085
1212717
1212717
Crimping pliers, for CATV connectors, 6.65 mm, 8.23 mm, 9.70 mm, three marked die stations, unlockable pressure lock, lateral entry - 1212717
1212302
1212302
Spare die for CRIMPFOX-TC 6 - 1212302
1212753
1212753
Die, for CRIMPFOX-M, for coaxial connectors - 1212753
1064998
1064998
Crimping pliers, for COMBICON crimp connectors with cross section: 0.14 ... 0.75 mm?. Unlockable pressure lock, precise parallel crimping, front entry, B crimp, incl. 2 positioning aids - 1064998
3240545
3240545
Ferrule with insulating collar that can be labeled. When using the magazine, the ferrules can be labeled with BLUEMARK. - 3240545
1212056
1212056
Spare die for CRIMPFOX-RCI 1 - 1212056
1212559
1212559
Screwdriver, PH crosshead (lasered), uninsulated, size: PH 1 x 80, 2-component grip, with non-slip grip - 1212559
1212731
1212731
Crimping pliers, for uninsulated tubular cable lugs, 4 - 16 mm?, indent and HEX crimp - 1212731
1212625
1212625
Punch pliers, for inspection tags and similar with 2 mm round mandrel, 30 mm mouth depth - 1212625
1212306
1212306
Spare knife for WIREFOX-D CX-4, strip-off dimension 6.8 mm - 1212306
1212364
1212364
Round-nose pliers, finely notched grip area, VDE 1000 V AC/1500 V DC tested - 1212364
1212313
1212313
Spare knife for WIREFOX-D 40 - 1212313
1212052
1212052
Crimping pliers, for 2.8 / 4.8 / 6.3 mm non-insulated slip-on sleeves, three marked die stations, unlockable pressure lock, lateral entry, incl. positioning tool - 1212052
1212629
1212629
Tool case, lockable, with adjustable strap, equipped with: cable cutter, diagonal cutter, micro cutter, stripping and sheath removal tools, crimping tool set, combination, needle-nose, and water pump pliers, VDE bladed and Phillips screwdrivers, control cabinet key, voltage tester, ferrule box, blades, tape measure, continuity tester, marking tool, ring and open-end wrench set, adjustable wrench, T-handle Allen key, safety glasses, hammer, 47-piece ratchet socket wrench set, 1/4" - 1212629
1212283
1212283
Screwdriver, positive/negative PH slot, VDE-isolated, size: PH 1 x 80, two component handle, with non-slip grip - 1212283
1212481
1212481
ESD electronic round-nose pliers, smooth grip, with opening spring, non-reflective coating and phosphate-treated, 2-component grip - 1212481
1212647
1212647
Screw bit, hexagon, E6.3-1/4" drive, size: Hex 3 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212647
1212526
1212526
Ring cable cutter, with ratchet function, for copper and aluminum up to 50 mm ?, for steel-armored CU/AL cables, for stranded steel cables up to 12 mm in diameter - 1212526
1212643
1212643
T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 8 x 200 mm, ergonomically shaped handle, matt chrome-plated - 1212643
1212724
1212724
Crimping pliers, for uninsulated cable lugs, 0.34 ... 4 mm?, indent crimp - 1212724