Home > Brand > PHOENIXCONTACT > Tools
1208445
1208445
Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive - 1208445
1212541
1212541
Screwdriver set, bladed/crosshead Phillips Recess?, 6-part, incl. rack - 1212541
1212486
1212486
Nut for assembling pressure nuts with 24 mm wrench size, for 4 mm hexagonal drive - 1212486
1212585
1212585
Screw bit, Torx?, E6.3-1/4" drive, size: TX 25 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212585
306704
306704
Connector pliers, simplify removing the isolating connector from a closed row of terminal blocks (if installed individually) - 306704
1203123
1203123
Pneumatic crimping pliers, as table top version, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09, for conductor cross section 0.25 - 2.5 mm? - 1203123
1212482
1212482
ESD electronic needle-nose pliers, smooth grip, with opening spring, non-reflective coating and phosphate-treated, 2-component grip - 1212482
1208403
1208403
Replacement rotary table for cable roller - 1208403
1208953
1208953
Set for stripping, crimping and screwing, equipped - 1208953
1212570
1212570
Screw bit, Torx?, E6.3-1/4" drive, size: TX 8 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212570
1208432
1208432
Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl diameter of 15 mm, for 4 mm hexagonal drive - 1208432
1212583
1212583
Screw bit, PH crosshead, E6.3-1/4" drive, size: PH 2 x 70 mm, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212583
1212163
1212163
Stripping tool for coaxial cables of ? 2.5 ... 7.6 mm, 2-level, strip-off dimensions 6.0 mm - 1212163
1212639
1212639
T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 3 x 100 mm, ergonomically shaped handle, matt chrome-plated - 1212639
1203110
1203110
Pneumatic crimping pliers, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09, for conductor cross section 0.25 - 2.5 mm? - 1203110
1212305
1212305
Spare knife for WIREFOX-D CX-3, strip-off dimension 12.0 mm - 1212305
1212600
1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits - 1212600
1212501
1212501
Wrap-up tool bag, unequipped - 1212501
1204889
1204889
Stamping bit, for bore holes: 7.0 mm diameter - 1204889
1212158
1212158
Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm?, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm? stranded/1.5 mm? solid, replaceable stripping blade - 1212158
3190438
3190438
Module socket contact, inserted in the PCC or HCC plug housing after crimping the conductor, for 0.5 mm? ... 1.0 mm? conductors - 3190438
3240568
3240568
Flat pin cable lug, with tab, soldered neck, red, 0.5 ... 1.5 mm?, pin width: 4.6 mm, easy conductor entry with Easy-Entry, for horizontal and vertical crimping with CRIMPFOX-RCI 6 - 3240568
1212754
1212754
Screw bit, slotted, E6.3-1/4" drive, size: 1 mm x 4 mm x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212754
1208924
1208924
Hydraulic cylinder - 1208924
1212835
1212835
Screw pliers, with fast adjustment, for wrench size 10 mm ... 36 mm, size: 260 mm - 1212835
1202726
1202726
Stamping bit, for bore holes: 8.4 mm diam - 1202726
1212369
1212369
Replacement blade for WIREFOX 2,5 - 1212369
1212503
1212503
Tool bag, equipped with: cable cutter, diagonal cutter, stripping pliers, NYM stripping tool, stripping tool for removing sheath, crimping pliers, crimping die for ferrules, combination, needle-nose, and water pump pliers, VDE screwdriver, bladed: 0.4 x 2.5/0.5 x 3.0/1.0 x 4.0/1.0 x 6.5, Philips: PHO/PH1/PH2, voltage tester, control cabinet key, knife, tape measure - 1212503
604707
604707
Insulating sleeve, as touch protection, slide onto the conductor before for 6.3 slip-on sleeves - 604707
1212303
1212303
Spare knife for WIREFOX-D CX-1, strip-off dimension 6.0 mm - 1212303
1212307
1212307
Spare knife for WIREFOX-D CX-5, strip-off dimensions 5.5 + 5.5 mm - 1212307
1212596
1212596
Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 3 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212596