Home > Brand > PHOENIXCONTACT
1212154
1212154
Stripping pliers, for AS interface flat-ribbon cables, any desired stripping length - 1212154
1212707
1212707
Stripping tool, for cables and conductors from 4 - 16 mm?, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm? stranded/1.5 mm? solid, replaceable stripping blade - 1212707
1203547
1203547
Stamping bit, for elongated hole: 4.5 x 12 mm - 1203547
1206285
1206285
Workbench, without mounting screws, without bore holes, without DIN-rail cutter, 50 mm thick plywood panel measuring 700 x 1200 mm - 1206285
1212705
1212705
Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm?, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm? stranded/1.5 mm? solid, replaceable stripping blade - 1212705
1212226
1212226
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 3 ? 6 Nm - 1212226
1212550
1212550
Screwdriver, slot-headed, size: 0.6 x 3.5 x 200 mm, 2-component grip, with non-slip grip - 1212550
1200298
1200298
Tape measure, 5 m - 1200298
1212565
1212565
Screwdriver, PZ crosshead (lasered), uninsulated, size: PZ 3 x 150, 2-component grip, with non-slip grip - 1212565
1200162
1200162
Offset screwdriver set, Torx, metric, TX 8, 9, 10, 15, 20, 25; 27, 30, 40 mm, 9-piece, BlackLaser surface, in practical holder - 1200162
1212071
1212071
Tool case, equipped with: crimping pliers, pressing dies for MC3, MC4 and SOLARLOK connectors, stripping tool for commercially available solar cables, stripping tool for SUNCLIX, VDE cable cutter, VDE screwdriver: PH1, PH2, 0.6x3.5 and 0.8x4.0 slots. - 1212071
1212480
1212480
ESD electronic diagonal cutter, round head, without chamfer, with opening spring, non-reflective coating and phosphate-treated, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1 mm diameter - 1212480
8191311
8191311
Tool belt pouch, unequipped, business card-sized marking label printed according to customer specifications - 8191311
1212310
1212310
Spare knife for WIREFOX-D CX-8, strip-off dimensions 2.5 + 6.8 mm - 1212310
1212479
1212479
Screw bit, positive/negative PH/bladed, E6.3-1/4" drive, size: PH 1 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212479
1212538
1212538
Screwdriver set, Torx? with drill bit, 6-part, incl. rack, contents: TX 8 x 60; TX 10 x 80; TX 15 x 80; TX 20 x 100; TX 25 x 100; TX 30 x 115 - 1212538
1206256
1206256
Profile cutter, for cutting to length and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 35/15 and for cutting the NS 15 and NLS?CU 3/10 neutral busbar to length, can accommodate 2 stamping bits, bits easily exchangeable, with metric measuring rail, delivered without stamping bits, with inch/millimeter measuring rail - 1206256
1212561
1212561
Screwdriver, PH crosshead (lasered), uninsulated, size: PH 3 x 150, 2-component grip, with non-slip grip - 1212561
1205134
1205134
Screwdriver, slot-headed, graded, for test socket screws, size: 0.9 x 6.5 x 175 mm, 2-component grip, with non-slip grip - 1205134
1202072
1202072
Assortment box, metal, supplied with ferrules acc. to DIN 46228-4: 1990-09, 500 pcs. each of AI 0,25-6 YE, AI 0,34-6 TQ, AI 0,5-8 WH, AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK, 300 pcs. AI 2,5-8 BU, 200 pcs. 4-10 GY, 100 pcs. AI 6-12 YE, CRIMPFOX 6T, QUICK WIREFOX 6 - 1202072
1206243
1206243
Profile cutter, for cutting to length and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 35/15 and for cutting the NS 15 and NLS?CU 3/10 neutral busbar to length, can accommodate 2 stamping bits, bits easily exchangeable, with metric measuring rail, delivered without stamping bits - 1206243
1212167
1212167
Stripping tool for coaxial cables of ? 2.5 ... 7.6 mm, 3-level, strip-off dimensions 5.5 and 5.5 mm - 1212167
1212589
1212589
Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 125 mm, 2-component grip, with non-slip grip - 1212589
1212020
1212020
Torque screwdriver, with preset torque of 2.0 Nm and 4 mm hexagonal drive for the pressure nut of the fast connection - 1212020
1212729
1212729
Crimping pliers, for symmetrical insulated DIN cable lugs, 0.5 mm? ... 6.0 mm? (red, blue, yellow), three marked die stations, unlockable pressure lock, lateral entry - 1212729
1208843
1208843
Tool set, equipped - 1208843
1212772
1212772
Crimping pliers, laser marked according to customer specifications, for insulated cable lugs, 0.14 - 1.0 mm? (light green, red), oval crimp - 1212772
1203563
1203563
Stamping bit, for elongated holes: 3.5 x 12 mm - 1203563
1212165
1212165
Stripping tool for coaxial cables of ? 2.5 ... 7.6 mm, 2-level, strip-off dimensions 12.0 mm - 1212165
1212637
1212637
T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 2 x 100 mm, ergonomically shaped handle, matt chrome-plated - 1212637
1200151
1200151
Screwdriver, Torx? with bore hole, TX 20 x 100, two-component handle - 1200151
1212606
1212606
Screw bit, bladed, graded, E6.3-1/4" drive, for test socket screws, size: 0.9 x 6.5 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212606