Home > Brand > PHOENIXCONTACT
1212158
1212158
Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm?, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm? stranded/1.5 mm? solid, replaceable stripping blade - 1212158
3190438
3190438
Module socket contact, inserted in the PCC or HCC plug housing after crimping the conductor, for 0.5 mm? ... 1.0 mm? conductors - 3190438
3240568
3240568
Flat pin cable lug, with tab, soldered neck, red, 0.5 ... 1.5 mm?, pin width: 4.6 mm, easy conductor entry with Easy-Entry, for horizontal and vertical crimping with CRIMPFOX-RCI 6 - 3240568
1212754
1212754
Screw bit, slotted, E6.3-1/4" drive, size: 1 mm x 4 mm x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212754
1208924
1208924
Hydraulic cylinder - 1208924
1212835
1212835
Screw pliers, with fast adjustment, for wrench size 10 mm ... 36 mm, size: 260 mm - 1212835
1202726
1202726
Stamping bit, for bore holes: 8.4 mm diam - 1202726
1212369
1212369
Replacement blade for WIREFOX 2,5 - 1212369
1212503
1212503
Tool bag, equipped with: cable cutter, diagonal cutter, stripping pliers, NYM stripping tool, stripping tool for removing sheath, crimping pliers, crimping die for ferrules, combination, needle-nose, and water pump pliers, VDE screwdriver, bladed: 0.4 x 2.5/0.5 x 3.0/1.0 x 4.0/1.0 x 6.5, Philips: PHO/PH1/PH2, voltage tester, control cabinet key, knife, tape measure - 1212503
604707
604707
Insulating sleeve, as touch protection, slide onto the conductor before for 6.3 slip-on sleeves - 604707
1212303
1212303
Spare knife for WIREFOX-D CX-1, strip-off dimension 6.0 mm - 1212303
1212307
1212307
Spare knife for WIREFOX-D CX-5, strip-off dimensions 5.5 + 5.5 mm - 1212307
1212596
1212596
Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 3 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212596
1212033
1212033
Nut for assembling pressure nuts with 13 mm wrench size, for 4 mm hexagonal drive - 1212033
1212727
1212727
Crimping pliers, compact pliers, for insulated cable lugs (light green, red, -1), three marked die stations, unlockable pressure lock, lateral entry - 1212727
1212693
1212693
Screwdriver, crosshead PH (lasered), insulated, size: PH 1 x 80, 2-component handle, with non-slip grip - 1212693
1212558
1212558
Screwdriver, PH crosshead, size: PH 0 x 60, 2-component grip, with non-slip grip - 1212558
1212505
1212505
Tool carry case wrap, equipped with: cable cutter, diagonal cutter, combination and needle-nose pliers - 1212505
1202629
1202629
Stamping bit, for bore holes: 5.3 mm diameter - 1202629
1212644
1212644
T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 10 x 200 mm, ergonomically shaped handle, matt chrome-plated - 1212644
1208461
1208461
Nut for assembling M8 connectors with longitudinal knurl and a knurl diameter of 10 mm, for 4 mm hexagonal drive - 1208461
1212064
1212064
Spare die for CRIMPFOX-RC 2,5 - 1212064
1200155
1200155
Screwdriver, Torx?, VDE-insulated, TX 8 x 80, two-component handle - 1200155
1212730
1212730
Crimping pliers, compact pliers, for symmetrical insulated cable lugs, 0.5 mm? ... 6.0 mm? (red, blue, yellow), three marked die stations, unlockable pressure lock, lateral entry - 1212730
1208416
1208416
Replacement holding arm for cable roller - 1208416
1206450
1206450
Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip - 1206450
1212532
1212532
Cordless screwdriver, incl. 1.5 Ah battery, forward/reverse running, 21-stage coupling, up to 600 rpm, 6.3 mm hexagonal fast connection drill chuck, torque can be adjusted from 0.3 ... 4.4 Nm - 1212532
1212134
1212134
Two-hand ring cable cutter, with ratchet function, for copper and aluminum up to 62 mm diameter (up to 750 mm?) - 1212134
1200294
1200294
Cordless screwdriver, incl. battery, two-speed gearbox, forward/reverse running and 16-stage clutch up to 450 rpm, hexagonal quick connection. - 1200294
1212594
1212594
Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 1 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212594
1212778
1212778
Crimping pliers, laser marked according to customer specifications, for uninsulated cable lugs, 10 - 25 mm?, indent crimp - 1212778
1202632
1202632
Stamping bit, for bore holes: 6.4 mm diameter - 1202632