หมวดหมูสินค้า
Screwdriver, slot-headed, VDE insulated, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip - 1212508
1212508
-
Replacement clamping jaws for WIREFOX 4, WIREFOX 6SC, and WIREFOX 10 - 1200286
1200286
-
Stripping tool, for cables and conductors from 4 - 16 mm?, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm? stranded/1.5 mm? solid, replaceable stripping blade - 1212155
1212155
-
Toolbag, with laptop and document compartment, equipped with: cable cutter, diagonal cutter, stripping pliers, insulation stripper, crimp tool set, - 1212504
1212504
-
Replacement blade for WIREFOX 4, for cables and conductors (especially for rubber and silicone insulations) of 0.1 - 4 mm? - 1212151
1212151
-
Combination pliers,165 mm, notched gripping surface, VDE 1000 V AC/ 1500 V DC tested - 1212834
1212834
-
Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 1 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212591
1212591
-
Screwdriver, Torx? with bore hole, TX 15 x 60, two-component handle - 1200150
1200150
-
Screwdriver, slot-headed, with impact cap, with hexagon wrench aid for open-end wrench and ring wrench, size: 1.6 x 10 x 175 mm, 2-component grip - 1212555
1212555
-
Screwdriver set, bladed/crosshead Pozidriv?, VDE insulated, 6-part, incl. rack - 1212540
1212540
-
Tool case, unequipped, lockable, with elasticated straps to hold tools in place, business card-sized marking label printed according to customer specifications - 8191312
8191312
-
Spare knife - 1200282
1200282
-
Screwdriver, crosshead PH (lasered), insulated, size: PH 2 x 100, 2-component handle, with non-slip grip - 1212694
1212694
-
Screw bit, PH crosshead, E6.3-1/4" drive, size: PH 3 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 - 1212584
1212584
-
Screwdriver set, Torx?, VDE-insulated, 6-part, incl. rack, contents: TX 8 x 80; TX 10 x 80; TX 15 x 80; TX 20 x 80; TX 25 x 100; TX 30 x 100 - 1212537
1212537
-
Contact removal tool, for turned CK 2,5... contacts - 1072067
1072067
-
Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip - 1212588
1212588
-
Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, knurl diameter: 16 mm, for 4 mm hexagonal drive - 1200305
1200305
-
Tool belt pouch, equipped with tools according to customer requirements. - 1200084
1200084
-
Blind rivets, ? 2.4 mm, 8 mm sleeve length, aluminum sleeve, zinc-plated steel pin, special version with extended pin for fixing UW/RW/PW 4... (the UNIFOX-RVT M/BIT 2,4L nosepiece is required for processing) - 3240548
3240548
-
Tool wrap, equipped with: voltage detector 12 ... 1000 V AC/1000 V DC, cable cutter, power side cutter, needle-nose pliers, water pump pliers, trapezoidal crimping tool 0.14 ...10 mm?, stripping tool with cutter 0.02 ... 10 mm?, stripping tool with pivoting blade ? 4.5 ... 40 mm, stripping tool with round longitudinal cutter ? 8 ... 13 mm, hexagon wrench set, VDE screwdriver – slim design, slotted: 0.4x2.0 / 0.6x3.5 / 0.8x4.0 cross: PZ1 / PZ2, folding meter - 1103843
1103843
-
Blind rivets, ? 4.8 mm, 8 mm sleeve length, aluminum sleeve, zinc-plated steel pin, flat head, standard version similar to DIN 7337 A - 3240519
3240519
-
Case, unequipped - 1206120
1206120
-
Blind rivets, ? 4.8 mm, 16 mm sleeve length, aluminum sleeve, zinc-plated steel pin, flat head, standard version similar to DIN 7337 A - 3240522
3240522
-