| Spec
Detail |
|
| Item |
Specifications |
| Part Number |
MSMD022G1U |
| Details |
Low inertia, Lead wire type, IP65 |
| Family Name |
MINAS A5 |
| Series |
MSMD Series |
| Type |
Low inertia |
| Protection class |
IP65 |
| About Enclosure |
Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions |
For more details, please refer to the instruction manual. |
| Flange sq. dimension |
60 mm sq. |
| Flange sq. dimension
(Unit:mm) |
60 |
| Motor lead-out configuration |
Lead wire |
| Motor encoder connector |
Lead wire |
| Power supply capacity (kVA) |
0.5 |
| Voltage specifications |
200 V |
| Rated output |
200 W |
| Rated current (A (rms)) |
1.6 |
| Holding brake |
without |
| Mass (kg) |
0.82 |
| Oil seal |
with |
| Shaft |
Key-way, center tap |
| Rated torque (N ท m) |
0.64 |
| Momentary Max. peak torque (N
ท m) |
1.91 |
| Max. current (A (o-p)) |
6.9 |
| Regenerative brake frequency
(times/min) |
Without option :No limit |
| With option :No limit |
|
| Option
(External regenerative resistor) Part No. : DV0P4283 |
| About regenerative brake
frequency |
Please refer to the details of [Motor Specification
Description] , Note: 1, and 2. |
| Rated rotational speed
(r/min) |
3000 |
| Rated rotational Max. speed
(r/min) |
5000 |
| Moment of inertia of rotor (
x10-4 kg ท mฒ) |
0.14 |
| Recommended moment of inertia
ratio of the load and the rotor |
30 times or less |
| About recommended moment of
inertia ratio of the load and the rotor |
Please refer to the details of [Motor Specification
Description] ,Note: 3. |
| Rotary encoder:
specifications |
20-bit Incremental system |
| Rotary encoder: Resolution |
1048576 |
: 
:
